Showing posts with label Cisco Exam Kit. Show all posts
Showing posts with label Cisco Exam Kit. Show all posts

Thursday, October 1, 2015

Cisco Wireless LAN Controller Configuration Guide PDF Ebook

Overview

This chapter describes the controller components and features. It contains these sections:

•Cisco Unified Wireless Network Solution Overview.

•Operating System Software.

•Operating System Security.

•Layer 2 and Layer 3 Operation.

•Cisco Wireless LAN Controllers.

•Controller Platforms.

•Cisco UWN Solution Wired Connections.

•Cisco UWN Solution WLANs.

•File Transfers,.

•Power Over Ethernet.

•Cisco Wireless LAN Controller Memory.

•Cisco Wireless LAN Controller Failover Protection.

•Network Connections to Cisco Wireless LAN Controllers.



Cisco Wireless LAN Controller Configuration Guide Ebook




SHARE BY GK
Computer Knowledge
Read more »

Wednesday, September 16, 2015

Cisco CCNA VTP - VLAN Trunking Protocol



On Cisco Devices, VTP (VLAN Trunking Protocol) maintains VLAN configuration consistency across the entire network. VTP uses Layer 2 trunk frames to manage the addition, deletion, and renaming of VLANs on a network-wide basis from a centralized switch in the VTP server mode. VTP is responsible for synchronizing VLAN information within a VTP domain and reduces the need to configure the same VLAN information on each switch.

VTP minimizes the possible configuration inconsistencies that arise when changes are made. These inconsistencies can result in security violations, because VLANs can cross connect when duplicate names are used. They also could become internally disconnected when they are mapped from one LAN type to another, for example, Ethernet to ATM LANE ELANs or FDDI 802.10 VLANs. VTP provides a mapping scheme that enables seamless trunking within a network employing mixed-media technologies.


Cisco CCNA VTP - VLAN Trunking Protocol pkt Sample




SHARE BY GK
Computer Knowledge
Read more »

Comparison of Different Wireless Media



Features


Wireless Media Type

Infrared

Laser
Narrow-band Radio
Spread-spectrum Radio

Microwave

1.

Cost
Cheapest
Similar to Infrared
More expensive, may need FCC license
More expensive
Very expensive
2.
Installation
Easy, may require line of sight
Requires line of sight
Requires trained technicians and can involve tall radio towers
Requires trained technicians and can involve tall radio towers
Requires trained technicians and can involve satellite dishes

3.
Distance
Under a kilometer
Can span several kilometers
Can span hundreds of kilometers
Can span hundreds of kilometers
Can span thousands of kilometers


4.
Other issues
Can attenuate due to fog and rain
Can attenuate due to fog and rain
Lower-power devices can attenuate; can be eavesdropped upon; Can also attenuate due to fog, rain, and solar flares
Lower-power devices can attenuate; can also attenuate due to fog, rain, and solar flares

Can be eavesdropped upon; can also attenuate due to fog, rain, and solar flares

SHARE BY GK
Read more »

How to calculate wildcard mask? [Easy Way]

Some students of Computer Networking especially those appearing in Certification exams such as Cisco Certification Exams or Juniper Certification Exams have problem in calculating wildcard mask. Some know the concept but their method is difficult that might result in wastage of time which may prove to be a problem in certification exams. Also, the wildcard mask is used in extensively in Access Control Lists (ACLs), EIGRP and OSPF, so learning how to calculate wildcard mask is important. We have decided to share a very simple method to calculate the wildcard mask efficiently and hopefully you will not have any ‘how to calculate wildcard mask?’ afterwards.

The method is: first calculate the subnet mask for the network for which you want to find the wildcard mask. Then subtract that subnet mask from 255.255.255.255

An example will explain this method more efficiently. Consider you have a network of 172.16.1.0/24 and you want to calculate the wildcard mask for it. We know that the subnet mask for this network is 255.255.255.0 Now we subtract this subnet mask from 255.255.255.255 as follow:

255.255.255.255

– 255.255.255.0
————————
0.0.0.255

As you can see, 0.0.0.255 is our required wildcard mask. Using this method we can find any wildcard mask easily.

Take another example, if you have network address of 172.16.0.0/20. We know that the subnet mask for this network address is 255.255.240.0

Using the above mentioned method, wildcard mask is:

255.255.255.255

– 255.255.240.0
————————
0.0.15.255

Wildcard mask, found nice and easy.


SHARE BY GK
Read more »

Graphical Network Simulator 3 With IOS Download



Graphical Network Simulator-3 is a software emulator for networks. It allows the combination of virtual devices and real devices, and so can be used to simulate complex networks. It uses Dynamips emulation software to simulate Cisco IOS

Installing and Configuring GNS3 on Windows 7 Documentation 


Graphical Network Simulator 3 With IOS




SHARE BY GK
Computer Knowledge
Read more »

CCNA Wireless Official Exam Certification Guide

Contents at a Glance

Part I Wireless LAN Fundamentals.

Chapter 1 Introduction to Wireless Networking Concepts.
Chapter 2 Standards Bodies.
Chapter 3 WLAN RF Principles.
Chapter 4 WLAN Technologies and Topologies.
Chapter 5 Antenna Communications.
Chapter 6 Overview of the 802.11 WLAN Protocols.
Chapter 7 Wireless Traffic Flow and AP Discovery.
Chapter 8 Additional Wireless Technologies.
Chapter 9 Delivering Packets from the Wireless to Wired Network.

Part II Cisco Wireless LANs.

Chapter 10 Cisco Wireless Networks Architecture.
Chapter 11 Controller Discovery and Association.
Chapter 12 Adding Mobility with Roaming.
Chapter 13 Simple Network Configuration and Monitoring with the Cisco
Controller.
Chapter 14 Migrating Standalone APs to LWAPP.
Chapter 15 Cisco Mobility Express.
Chapter 16 Wireless Clients.

Part III WLAN Maintenance and Administration.

Chapter 17 Securing the Wireless Network.
Chapter 18 Enterprise Wireless Management with the WCS and the Location Appliance.
Chapter 19 Maintaining Wireless Networks.
Chapter 20 Troubleshooting Wireless Networks.

Part IV Final Preparation.

Chapter 21 Final Preparation.


CCNA Wireless Official Exam Certification Guide.




SHARE BY GK
Computer Knowledge
Read more »

Cisco router Software Configuration ebook


Part 1 Configuring the Router Description

Module 1

Overview of Hardware and Software Describes new hardware and software features in this release, features by platform, new slots, common ports, and getting started tasks.

Module 2

Basic Router Configuration Describes how to perform the basic router configuration, interface configuration, and routing configuration.

Module 3

Configuring Backup Data Lines and Remote Management

Describes how to configure backup interfaces, dial backup, and remote management.

Module 4

Configuring Power Efficiency Management

Describes the hardware and software power efficiency management features on the router.

See Cisco EnergyWise Configuration Guide for information about configuring power efficiency management on modules and interface.

Module 5

Configuring Security Features

Describes how to configure security features.

Module 6

Unified Communications on Cisco Integrated Services Routers

Describes voice application services that are supported on these routers.

Module 7

Configuring Next-Generation High-Density PVDM3 Modules

Describes how to configure the new next-generation PVDM31 installed on your router.

Module 8

Multi-Gigabit Fabric Communication

Describes how modules and interface cards inter-communicate using the MGF2 on the router.

Module 9

Upgrading the Cisco IOS Software Describes how to upgrade the Cisco IOS software image on the router or the access point.

Part 2 Configuring the Access Point Description

Module 1

Wireless Overview Describes the autonomous image and recovery image shipped on the Cisco 1941W access point flash.

Explains the default autonomous mode and Cisco Unified mode.

Module 2

Configuring the Wireless Device Describes how to configure the autonomous wireless device, how to upgrade the autonomous software to Cisco Unified software, and how to configure a Unified wireless device.

Module 3

Configuring the Radio Settings Describes how to configure the radio settings for the wireless device.

Module 4

Administering the Wireless Device Describes many administration tasks for the wireless device.


Cisco router Software Configuration Ebook.


BY GK
computer knowledge 
Read more »

What is a Default Routing

A Default Route (also known as the gateway of last resort) is a special type of static route. Where a static route specifies a path a router should use to reach a specific destination, a default route specifies a path the router should use if it doesn’t know how to reach the destination.

Default Route is the network route used by a router when there is no other known route exists for a given IP datagram's destination address. All the IP datagrams with unknown destination address are sent to the default route.


Default Routing pkt file download Click Here 



How to configure Default Routes Watch This Video



SHARE BY GK
Read more »

Cisco Certified Network Associate (CCNA) Study Material Kit.

Cisco Certified Network Associate (CCNA) Routing and Switching is a certification program for entry-level network engineers that helps maximize your investment in foundational networking knowledge and increase the value of your employer's network.

The first free CCNA study guide is for those who prefer to take the composite CCNA 200-120 exam. This way you can get your CCNA Routing and Switching certification by only taking one exam.

So why wait? Start studying now to further your IT networking career with a Cisco CCNA certification with our free resources! Then if you decide you want the best CCNA home lab to really hammer home the exam concepts, visit our sponsor site Certification Kits to get the right home lab kit for you!

Cisco Certified Network Associate (CCNA) Study Material Kit.



CCNA Routing and Switching Study Guide.Pdf



Cisco Packet Tracer 6.0.1 for Windows (with tutorials)




SHARE BY GK
Computer Knowledge
Read more »

Classless Inter-Domain Routing (CIDR)


CIDR (Classless Inter-Domain Routing, sometimes known as supernetting) is a way to allocate and specify the Internet addresses used in inter-domain routing more flexibly than with the original system of Internet Protocol (IP) address classes. As a result, the number of available Internet addresses has been greatly increased. CIDR is now the routing system used by virtually all gateway hosts on the Internet's backbone network. The Internet's regulating authorities now expect every Internet service provider (ISP) to use it for routing.

The original Internet Protocol defines IP addresses in four major classes of address structure, Classes A through D. Each of these classes allocates one portion of the 32-bit Internet address format to a network address and the remaining portion to the specific host machines within the network specified by the address. One of the most commonly used classes is (or was) Class B, which allocates space for up to 65,533 host addresses. A company who needed more than 254 host machines but far fewer than the 65,533 host addresses possible would essentially be "wasting" most of the block of addresses allocated. For this reason, the Internet was, until the arrival of CIDR, running out of address space much more quickly than necessary. CIDR effectively solved the problem by providing a new and more flexible way to specify network addresses in routers. (With a new version of the Internet Protocol - IPv6 - a 128-bit address is possible, greatly expanding the number of possible addresses on the Internet. However, it will be some time before IPv6 is in widespread use.)

Using CIDR, each IP address has a network prefix that identifies either an aggregation of network gateways or an individual gateway. The length of the network prefix is also specified as part of the IP address and varies depending on the number of bits that are needed (rather than any arbitrary class assignment structure). A destination IP address or route that describes many possible destinations has a shorter prefix and is said to be less specific. A longer prefix describes a destination gateway more specifically. Routers are required to use the most specific or longest network prefix in the routing table when forwarding packets.

CIDR is supported by the Border Gateway Protocol, the prevailing exterior (interdomain) gateway protocol. (The older exterior or interdomain gateway protocols, Exterior Gateway Protocol and Routing Information Protocol, do not support CIDR.) CIDR is also supported by the OSPF interior or intradomain gateway protocol.

Classless Inter-Domain Routing examples




SHARE BY GK
Read more »

HSRP VRRP GLBP EtherChannel in Hindi by Jagvinder Thind



Redundancy - HSRP VRRP GLBP


SHARE BY GK
Computer Knowledge
Read more »

Cisco ACL Access List in Hindi by JagvinderThind

Read more »

IP Addressing and Subnetting in Hindi



This Video Series in Hindi explains Basics of IP Address, IP Addressing, Subnet, Subnetting and VLSM in Hindi. VLSM is important topic in Cisco CCNA CCNP Exam

SHARE BY GK
Read more »

Connect Two Switches With A Router




Connect Two Switches With A Router.pkt




SHARE BY GK
Computer Knowledge
Read more »

New Cisco CCNA Training Video 200-120 CCNA प्रशिक्षण वीडियो




CCNA Training Video Series in Hindi by Jagvinder Thind is about New CCNA 200-120, ICND 100-101 & ICND 200-101 Exams. CCNA tutorial CCNA प्रशिक्षण वीडियो. The exams and training course curriculum have been redesigned for ICND1 and ICND2. This Video Series provides the incremental topics that has been added.ccna full course

Read more »

Administrative Distance Default Values Of The Routing Protocol


Lists the administrative distance default values of the protocols that Cisco device supports below;

Routing protocol /Route source
Default Distance Values
Connected interface
0
Static route
1
Enhanced Interior Gateway Routing
Protocol (EIGRP) summary route
5
External Border Gateway Protocol (eBGP)
20
Internal EIGRP
90
IGRP
100
OSPF
110
Intermediate System-to-Intermediate System (IS-IS)
115
Routing Information Protocol (RIP)
120
Exterior Gateway Protocol (EGP)
140
On Demand Routing (ODR)
160
External EIGRP
170
Internal BGP
200
Unknown
255


SHARE BY GK
Read more »

Internet Protocol version 6 (IPv6) tutorial

Internet Protocol version 6 (IPv6) is the latest revision of the Internet Protocol (IP) and the first version of the protocol to be widely deployed. IPv6 was developed by the Internet Engineering Task Force (IETF) to deal with the long-anticipated problem of IPv4 address exhaustion. This tutorial will help you in understanding IPv6 and its associated terminologies along with appropriate references and examples.

This tutorial has been designed to help beginners understand the basic concepts of IPv6 required to work with any TCP/IP based protocols. After completing this tutorial you will find yourself at a moderate level of expertise of IPv6 from where you can take yourself to next levels.

Before you start proceeding with this tutorial, we are assuming that you are already aware of basic computer and network concepts such as what is a protocol, why do we need protocol, network layers, etc.

Internet Protocol Version 6 (IPv6) Tutorial.Pdf
Read more »

Autonomous System (AS) Internet

On the Internet, an autonomous system (AS) is the unit of router policy, either a single network or a group of networks that is controlled by a common network administrator (or group of administrators) on behalf of a single administrative entity (such as a university, a business enterprise, or a business division). An autonomous system is also sometimes referred to as a routing domain. An autonomous system is assigned a globally unique number, sometimes called an Autonomous System Number (ASN).

Networks within an autonomous system communicate routing information to each other using an Interior Gateway Protocol (IGP). An autonomous system shares routing information with other autonomous systems using the Border Gateway Protocol (BGP). Previously, the Exterior Gateway Protocol (EGP) was used. In the future, the BGP is expected to be replaced with the OSI Inter-Domain Routing Protocol (IDRP).

AS numbers are assigned in blocks by the Internet Assigned Numbers Authority (IANA) to regional Internet registries (RIRs). The appropriate RIR then assigns AS numbers to entities within its designated area from the block assigned by the IANA. Entities wishing to receive an ASN must complete the application process of their local RIR and be approved before being assigned an ASN. Current IANA ASN assignments to RIRs can be found on the IANA website


SHARE BY GK
Read more »

Port Security in Hindi

Read more »